HP 41 cx stop working

Everything about 41C 41CV and 41CX Hardware

HP 41 cx stop working

Postby cmplin » Mon Jan 26, 2015 4:46 am

My HP 41 cx finally stops working. I open it and tried to clean the battery contact, and it does not help. I noticed that the thin layer secured on battery contact(the one you can remove with screw) have areas that are broken, does that cause the 41 cx to not working? And any suggestion on how to get a replacement or how to fix it?

thanks
/Peter
cmplin
.
.
 
Posts: 1
Joined: Mon Jan 26, 2015 4:42 am

Re: HP 41 cx stop working

Postby Garth » Tue Jan 27, 2015 7:27 am

If you're talking about the flex circuit, you can get a brand new one at http://www.clonix41.org/Maintenance/IO_ ... _Block.htm .

There's a video showing how to install the replacement, at https://www.youtube.com/watch?v=jUTAZSE ... e=youtu.be .
http://WilsonMinesCo.com (60 HP-41 links on the links page)
Garth
Moderator
Moderator
 
Posts: 165
Joined: Tue Jan 20, 2009 1:31 am


Return to HP-41 Hardware

Who is online

Users browsing this forum: No registered users and 1 guest