Unnecessary wires?
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Hello
I decided to open my recently acquired 41 CV for fixing a cosmetic issue and I'm afraid that apparently I made a mistake... And I say apparently, because the machine works OK, despite two broken connections.
When I opened it, I noticed that there were two wires (blue and red) which were attached, on one side, to a golden circle glued to the lower half (the batteries half) and on the other side to the main board on the upper half (the keyboard half), I don't remember exactly where.
Following an unfortunate movement, both attachments on the main board broke (or they were never really attached??) and I started to think a had ruined my brand new acquisition. In a downbeat mood, I re-screwed the two halves and mechanically switched on the machine. To my surprise, despite the broken connections, the machine started and it seems to be perfectly working.
I could take some shots, but now that everything seems OK, I'm too afraid to open it again.
Does anyone have any idea of what happened? Fact is, there are two wires inside the machines with are disconnected.
I decided to open my recently acquired 41 CV for fixing a cosmetic issue and I'm afraid that apparently I made a mistake... And I say apparently, because the machine works OK, despite two broken connections.
When I opened it, I noticed that there were two wires (blue and red) which were attached, on one side, to a golden circle glued to the lower half (the batteries half) and on the other side to the main board on the upper half (the keyboard half), I don't remember exactly where.
Following an unfortunate movement, both attachments on the main board broke (or they were never really attached??) and I started to think a had ruined my brand new acquisition. In a downbeat mood, I re-screwed the two halves and mechanically switched on the machine. To my surprise, despite the broken connections, the machine started and it seems to be perfectly working.
I could take some shots, but now that everything seems OK, I'm too afraid to open it again.
Does anyone have any idea of what happened? Fact is, there are two wires inside the machines with are disconnected.