HP 41C

Everything about 41C 41CV and 41CX Hardware

HP 41C

Postby mvdmeule » Sat Jan 10, 2009 4:37 pm

I have a HP 41C in my collection
When trying it out it functions normally except when putting it off: I get always "Data Error"on the display which I have to clear with the back key, then Off works.
What does this mean??

Mark
mvdmeule
.
.
 
Posts: 2
Joined: Sat Jan 10, 2009 4:27 pm

Re: HP 41C

Postby jotne » Sat Jan 10, 2009 9:24 pm

Try to remove all modules and see.
You can also take a reset (deletes all data in memory) Holding back arrow while power on.
I have also seen strange problems do to bad connection between CPUboard and Keyboad.
HP41CX with CCD module . HP41CV . HP42S + many other HP calculators
User avatar
jotne
Site Admin
Site Admin
 
Posts: 64
Joined: Mon Nov 24, 2008 6:52 pm

Re: HP 41C

Postby mvdmeule » Sat Jan 10, 2009 11:10 pm

There are no modules
Did already the reset
Problem rest. So hardware problem?

Mark
mvdmeule
.
.
 
Posts: 2
Joined: Sat Jan 10, 2009 4:27 pm

Re: HP 41C

Postby jotne » Sun Jan 11, 2009 10:25 am

Is this the old or new model (fullnut, halfnut)
viewtopic.php?f=2&t=3

If its the old version, I have seen often problem with the plastic that hold cpu board. The screw do not press enough do to the broken plastic.

If you look at first picture in the link above, this units has been armored with some nuts.
HP41CX with CCD module . HP41CV . HP42S + many other HP calculators
User avatar
jotne
Site Admin
Site Admin
 
Posts: 64
Joined: Mon Nov 24, 2008 6:52 pm


Return to HP-41 Hardware

Who is online

Users browsing this forum: No registered users and 1 guest

cron