Page 1 of 1

HP-41CL Conversion Question

PostPosted: Tue Sep 10, 2019 11:29 pm
by TwoWeims
I have a very nice HP-41C that I would like to convert to a 41CL.
It has the correct display driver but unfortunately it has the inter-board connector described in the manual as:

The connector style in the middle is rare. It has conductors embedded vertically in the material and will appear white or pale pink from the side. This connector type is impossible to reuse, which is probably why it is rare. Unless you have a replacement connector you should find another calculator to use for the conversion.


Is it possible to obtain one of the "good" connectors and proceed with the conversion?
This 41C is in perfect condition otherwise with no physical damage.

Thanks in advance for any insight.

Re: HP-41CL Conversion Question

PostPosted: Tue Oct 01, 2019 3:37 am
by hthse
I do not know if it helps, but this thread may be interesting: https://www.hpmuseum.org/forum/thread-7 ... =connector

Re: HP-41CL Conversion Question

PostPosted: Sun Sep 20, 2020 10:09 pm
by divasson