Synthetic programming on a HP41CX

Synthetic programming on a HP41CX

Postby PoetikBiker » Fri Jul 27, 2012 10:00 am

Hello,

I want to use the synthetic Programming on a HP-41CX. But according to the synthetic programming manual, I need a removeable Memory Module to start.

But my HP-41CX doesn't have one!

Is there a way to use the synthetic programming on a CX, or is there no need to do this, because some synthetic functions (e.g. the access to the flag-registers) are alway implemented?

Thanks for you informations!
PoetikBiker
..
..
 
Posts: 4
Joined: Sat Jul 21, 2012 7:15 pm

Re: Synthetic programming on a HP41CX

Postby Garth » Fri Jul 27, 2012 7:28 pm

I have a 41cx and started synthetic programming on it. I started with the byte grabber key assignment described in the book "Extend Your HP-41" by Wlokek (sp?) Mier-Jedrzejowicz, chapter 14. I suppose it's the same byte grabber described in other books, which takes advantage of a bug in the original 41, a bug HP refrained from fixing because it made for more sales. I had no removable memory module until 20+ years later when I got a double extended memory module. A few years after I started synthetic programming, the ZENROM was on sale at EduCalc, so I got one. It makes synthetics available directly from the keyboard, plus has a direct RAM editor, plus assembler, and a few other nice things.
Garth
Moderator
Moderator
 
Posts: 290
Joined: Tue Jan 20, 2009 1:31 am

Re: Synthetic programming on a HP41CX

Postby jotne » Mon Aug 06, 2012 7:39 am

Start out creating a byte grabber following this procedure.
It should work on all HP 41C(V/X)

No memory module needed :)
HP41CX with CCD module . HP41CV . HP42S + many other HP calculators
User avatar
jotne
Site Admin
Site Admin
 
Posts: 69
Joined: Mon Nov 24, 2008 6:52 pm

Re: Synthetic programming on a HP41CX

Postby Garth » Sat Jan 12, 2013 7:42 am

Edit: Johny3329 whose post I reply to below was later banned and kicked out for adding spam, but I'll leave my reply. The relevance of his post to the 41 (and to this synthetic-programming topic) was questionable, but I initially gave him the benefit of the doubt.

johny3329 wrote:How do I recognize what barcode system is being used? I have a barcode and what it decodes to, but I need to find out WHAT code system was used, so that I can create more barcodes in the same code system. Where can I go, online, to determine what system is being used?

I don't have a direct answer for you, but HP document 85153-90019, "Creating Your Own HP-41 Bar Code" seems to have very detailed information on the bar code types, and has BASIC programs to generate them. A scan of this document is at cd-8/sw/hpbc.pdf of this DVD, and probably on this DVD as well (from this site) although I don't have the latter to verify. There are probably other files on there too that would help. I don't know if Frank Wales lurks here, but he was on the design team for the HP-71 wand which reads about ten different bar code types and I believe can also read HP-41 bar code. See also if any of these pages help:

web-based HP-41 bar code generator: http://rwiker.github.com/hp41barcode/
http://users.swing.be/id-phy/HP41/HP41_ProgEnv.html
http://www.hpmuseum.org/cgi-sys/cgiwrap ... gi?read=42
http://www.hpmuseum.org/software/41uc.htm
Garth
Moderator
Moderator
 
Posts: 290
Joined: Tue Jan 20, 2009 1:31 am


Return to Programming

Who is online

Users browsing this forum: No registered users and 1 guest

cron