V41: saving of files in X-Memory; HowTo? (test; no HW use)
Posted: Fri Jul 08, 2022 4:48 pm
I have the setup of V41 with a CX which show
first
then
However XEQ SXQA
of the program (should store the files in X memory)
trace in ILPER printer area:
Thats weird. Why 180 for each program?
How programs which are stored in an HP41CX of 319 register cannot be stored in X-Memory with 600 registers?
Just for me to understand (its only V41; not a HW X-memory; still to be tested there).
first
EMDIR
DIR EMPTY
T= 54.00000000
Z= 0.000000000
Y= 600.0000000
X= 600.0000000
then
CAT 1
LBL`SLRQA
LBL`BPER4
LBL`ALQR
LBL`CQRL
LBL`CQP
LBL`CQRC
LBL`CQRZ
LBL`RQ
LBL`SQIY
LBL`SQJY
LBL`SQKY
LBL`AQIY
LBL`AQJY
LBL`AQKY
LBL`RQIX
LBL`RQJX
LBL`RQKX
LBL`Q*
LBL`CQ
LBL`TQR
END 1256 BYTES
LBL`SXQA
END 153 BYTES
.END. 05 BYTES
However XEQ SXQA
of the program (should store the files in X memory)
- Code: Select all
LBL "SXQA"
"SLRQA"
XROM 25,38 = SAVEP
"TQR"
XROM 25,38
"CQ"
XROM 25,38
"Q*"
XROM 25,38
"RQIX"
XROM 25,38
"RQJX"
XROM 25,38
"RQKX"
XROM 25,38
"RQVX"
XROM 25,38
"SQIY"
XROM 25,38
"SQJY"
XROM 25,38
"SQKY"
XROM 25,38
"AQIY"
XROM 25,38
"AQJY"
XROM 25,38
"AQKY"
XROM 25,38
"RQ"
XROM 25,38
"CQRZ"
XROM 25,38
"CQRC"
XROM 25,38
"CQP"
XROM 25,38
"BPER4"
XROM 25,38
"ALQR"
XROM 25,38
"CQRL"
XROM 25,38
RTN
END
trace in ILPER printer area:
- Code: Select all
XEQ "SXQA"
01*LBL "SXQA"
"SLRQA"
SAVEP
"TQR"
SAVEP
"CQ"
SAVEP
"Q*"
SAVEP
NO ROOM
EMDIR
SLRQA P180
TQR P180
CQ P180
T= 0.000000000
Z= 600.0000000
Y= 600.0000000
X= 54.00000000
Thats weird. Why 180 for each program?
How programs which are stored in an HP41CX of 319 register cannot be stored in X-Memory with 600 registers?
Just for me to understand (its only V41; not a HW X-memory; still to be tested there).