HDRIVE1.DAT from ilper/giesselink not readable in pyILPER
Posted: Sun Feb 06, 2022 6:13 pm
Hello,
I have a file HDRIVE1.DAT from ilper here https://hp.giesselink.com/hpil.htm (on a raspberry pi4, ARM, 32bits, ext4 file system, ilper started in a box86&wine environment) and it is not readable from pyILPER (in a Debian 11, x86 64bits, ext4 file system).
Same in the other direction: I have a file I created few months ago and used with pyILPER and it cannot be read with ilper (I cannot remember where the original HDRIVE1.DAT used with pyILPER came from; I can only remember the first try with an HDRIVE1.DAT was not successfull and I had to find a working one).
It means for me, I cannot put the HDRIVE1.DAT on an usb stick and use it whatever on PC 32/64bits or ARM board for communicating via pilbox to the HP41.
Has anybody experienced incompatibilities of HDRIVE1.DAT between ilper under windows and pyilper under MacOS/Linux/Windows?
I have a file HDRIVE1.DAT from ilper here https://hp.giesselink.com/hpil.htm (on a raspberry pi4, ARM, 32bits, ext4 file system, ilper started in a box86&wine environment) and it is not readable from pyILPER (in a Debian 11, x86 64bits, ext4 file system).
Same in the other direction: I have a file I created few months ago and used with pyILPER and it cannot be read with ilper (I cannot remember where the original HDRIVE1.DAT used with pyILPER came from; I can only remember the first try with an HDRIVE1.DAT was not successfull and I had to find a working one).
It means for me, I cannot put the HDRIVE1.DAT on an usb stick and use it whatever on PC 32/64bits or ARM board for communicating via pilbox to the HP41.
Has anybody experienced incompatibilities of HDRIVE1.DAT between ilper under windows and pyilper under MacOS/Linux/Windows?