Reinforce HP41CV treads tutorial with pictures

Everything about 41C 41CV and 41CX Hardware

Reinforce HP41CV treads tutorial with pictures

Postby Guilherme Porto » Mon Feb 06, 2023 11:49 am

Hi All
See attached tutorial with pictures about reinforce the tread holders
One outside with hand made washers and the other internally with metal rings to reinforce the treads.
Best Regards,
Guilherme Porto
Attachments
HP 41cv tutorial washer repair.pptx
Ppt tutorial with pictures
(1.69 MiB) Downloaded 1190 times
Guilherme Porto
.
.
 
Posts: 3
Joined: Sun Nov 20, 2022 1:19 pm

Re: Reinforce HP41CV treads tutorial with pictures

Postby Garth » Mon Feb 06, 2023 6:57 pm

Is that a standard 3AG fuse?
Garth
Moderator
Moderator
 
Posts: 290
Joined: Tue Jan 20, 2009 1:31 am

Re: Reinforce HP41CV treads tutorial with pictures

Postby Guilherme Porto » Wed Feb 08, 2023 1:12 am

Hello Garth,
The fuse is the small one.
But doesn’t matter because it comes with a bunch of sizes.
What really matters is the inner diameter that should fit exactly with the HP posts.
It was really a good coincidence that I found an old TV antenna that also fits perfectly.
So the trick here is to find the perfect match or to ask a turning shop to machine that for you.
Guilherme Porto
.
.
 
Posts: 3
Joined: Sun Nov 20, 2022 1:19 pm


Return to HP-41 Hardware

Who is online

Users browsing this forum: Bing [Bot] and 1 guest

cron