HP41C - USER MODE

Everything about 41C 41CV and 41CX Hardware

HP41C - USER MODE

Postby tacmorris316 » Sat Jan 22, 2011 1:23 am

I have a HP41C that until recently has been operating without any issues. Recently I have been unable to utilize the "USER" mode of the calculator. When the "USER" button is pressed it appears to have no affect (does not indicate user mode on display). Not sure whether this is a hardware or software issue. All other buttons work properly. I have disassembled the device and internal components look to be in good condition (no corrosion). I have tried to reset the calculator but this did not seem to resolve the issue.

Any suggestions.....
tacmorris316
.
.
 
Posts: 2
Joined: Sat Jan 22, 2011 1:16 am

Re: HP41C - USER MODE

Postby Garth » Sat Jan 22, 2011 5:32 am

Not as convenient of course, but you can do SF 27 and CF 27. CF 27 could be assigned to a user key, but there wouldn't be any point in assigning SF 27 to one.
Garth
Moderator
Moderator
 
Posts: 292
Joined: Tue Jan 20, 2009 1:31 am

Re: HP41C - USER MODE

Postby tacmorris316 » Mon Jan 24, 2011 5:46 pm

Not sure if I exactly follow your suggestion. Not sure what a SF or CF 27 is?

Does this issue sound like a hardware failure or is there a special section of memory where this function is located? Curious if anyone else has experienced a similar issue.
tacmorris316
.
.
 
Posts: 2
Joined: Sat Jan 22, 2011 1:16 am

Re: HP41C - USER MODE

Postby Garth » Mon Jan 24, 2011 6:21 pm

It is a hardware problem, but flag 27 is the user-keyboard flag. SF 27 is just the 41's instruction for "Set Flag 27" (ie, activate user keyboard) and CF 27 is "Clear Flag 27" (ie, de-activate user keyboard).
Garth
Moderator
Moderator
 
Posts: 292
Joined: Tue Jan 20, 2009 1:31 am


Return to HP-41 Hardware

Who is online

Users browsing this forum: No registered users and 1 guest

cron