Page 1 of 1

HP15C programm into HP41; HOWTO

PostPosted: Thu Oct 07, 2021 1:32 pm
by floppy_stuttgart
Hello,
I was searching a RPN command comparison/summary for transferring HP15C RPN programs into HP41; example https://www.hpmuseum.org/forum/thread-17003-page-2.html
Has anybody anything?
Especially the
RCL "+*-/" nn
are new for me. Perhaps other commands will be discovered.

Re: HP15C programm into HP41; HOWTO

PostPosted: Thu Oct 07, 2021 9:19 pm
by mike-stgt
floppy_stuttgart wrote:... comparison/summary for transferring HP15C RPN programs into HP41 ... Has anybody anything? Especially the RCL "+*-/" nn are new for me.

Eric Rechlin offers the HP-15C Owner's Handbook in several languages. Recall Arithmetic is described in 'Section 3: The Memory Stack, LAST X, and Data Storage.'
Perhaps other commands will be discovered.

Sure. If you are new to a subject reading the manual may help.

You referenced a thread about "Perimeter of the Ellipse". If you are interested in a HP41 version of the algorithm in question, just once more, here it is.

Re: HP15C programm into HP41; HOWTO

PostPosted: Fri Oct 08, 2021 2:21 pm
by floppy_stuttgart
Thanks. Looks like SandMath has the HP15C stuff.
I will include the SandMath (HP-15 stuff) into my HP41 codes.

Re: HP15C programm into HP41; HOWTO

PostPosted: Fri Oct 08, 2021 10:54 pm
by mike-stgt
floppy_stuttgart wrote:Looks like SandMath has the HP15C stuff.

Nope. Only differing and incomplete.
Examples: RAND is the same linear congruential generator (LCG) as in PPC-ROM and CCD Module, ist is not a full period LCG. So it differs from the one in HP-15C.
In addition, HP-15C offers a RCL RAN# (not found in SandMath, at least not at first glance). But it is in the latest update of my Voyagers' Pseudorandom Number Generator.

Re: HP15C programm into HP41; HOWTO

PostPosted: Sat Oct 09, 2021 1:36 am
by Garth
Be sure to look into the same author's (Angel's) 41z module.
http://systemyde.com/pdf/41z_Deluxe_Manual.pdf