You'd like to know "what happens at me" -- mental or emotional? -- using ILVideo80? Well, honestly, I am happy as can be that it works quite similar as described in the accompanying help file.floppy_stuttgart wrote:I just wanted to know what happens at somebody here using the ILVideo.
It's great fun, frankly, a quintessentially recommendable experience, without compromise, right from the start.If no-One is using it and can explain what he experienced on its windows machine, thats fine.
rprosperi wrote:The manual for the 80-Column display interface can be found here: http://www.hhcworld.com/files/compendiu ... manual.pdf
floppy_stuttgart wrote:Nutzlose Antwort.
Run winecfg, go to "Graphics", and either [b]uncheck "Allow the window manager to decorate the windows"[/b] or check "Emulate a virtual desktop"
floppy_stuttgart wrote:Now, how to have the outputs to IL-Video, too, in the setup described hereafter
a) hardware HP41 & Pilbox
b) Pil-Box-Bridge
c) Ilper
d) IL-video
Looks like the video get forgotten. not sure of this.
floppy_stuttgart wrote:Comment to the previous Post: when the in/out port setup is different, then the Video can be used.. but nomore the printer (new issue).
jeffcalc wrote:Especially with this setup with 2 drives and 2 printer-class devices, there are for instance impossible tasks, such as getting the catalog of drive 2 listed on the ILPer printer (if someone finds a way, let me know!)
No comment -- what could be taken as an offending comment so let me state more precisely, I prefere a good documentatation that pictures all features of a program so I may decide what's useful for me and my goal. Trial and error is like looking for easter eggs, quite impossible to find that way how to change the internal sequence of devices bundled within ILPer.But the fun is in the experimentation !
mike-stgt wrote:In contrast to other programs simulating a single virtual IL device ILPer is quite handy and offers a bundle of the mostly used ones. The description shows how their internal sequence may be altered. Result see screen shot below. First I executed LCAT, its output is automatically displayed on the video device, next I did SF 15 to get following commands traced. 3 SELECT is still shown on the 82163A while DIR and its output is printed on the ILPer display as requested.
HTH
M.
The impossible task was to have two printing devices within the loop, one within ILPer and another one. Removing the 92198 is a different setupjeffcalc wrote:We could just have removed the 92198.
Yes, today I did, probably. No doubt the HP71B is much more flexible with its PRINTER IS and DISPLAY IS settings.But I'm sure you understood what I meant...
See in Warren's archive "82183A Extended IO Module.pdf", Appendix C 'Examples', Printing an HP-IL Device Directory (The LCAT Program), p. 75 ff.BTW, what is LCAT? Not in the HP-IL module and not in usual HP-IL extensions (X-IO, X-IL)
HTH
M.
At least it's fun to discuss on HP-IL!
J-F
jeffcalc wrote:
BTW, what is LCAT? Not in the HP-IL module and not in usual HP-IL extensions (X-IO, X-IL)
J-F
LBL "LCAT" ; 82183A Extended IO Module.pdf Appendix C 'Examples', XROM 23,xx
; Printing an HP-IL Device Directory (The LCAT Program), p. 75 ff.
; recommended there
; https://forum.hp41.org/viewtopic.php?f=6&t=552&start=20
;
; change log
; 2022 05 29 creation by user floppy from
; https://www.hpmuseum.org/forum/
;
; create raw files with "hp41uc.exe /t=LCAT.TXT /r /k"
; then upload in PC emulator / virtual drive / HP41 hardware
;
AUTOIO ; find number of devices on HP-IL
CF 29
FIX 0
XROM 23,33 ; NLOOP
CLA
ARCL X
"\- DEVICES" ; print number of devices
PRA
1 E3
/ ; stores a loop counter
1 ; return primary address
+
STO 00
XROM 23,45 ; RCLSEL
STO 01
CLA
"PRIMARY ADR. "
ARCL X
PRA ; print primary address
"ADR ID AID"
"\- CLASS"
PRA ; print directory head
;
LBL 01
CLA
10
RCL 00 ; recall loop counter
X<Y? ; ensure that address is two digits
"0"
ARCL X
"\- "
ACA ; accumulates address into print buffer
SELECT ; select device having address equal to loop counter
SF 25
ID ; return device ID
FC?C 25
"--------"
8
XROM 23,09 ; ALENGIO ; find length of ID string
-
X=0?
GTO 04
;
; fills out device ID string to eight characters
;
LBL 03
"\- "
DSE X
GTO 03
;
LBL 04
"\- "
100
SF 25
AID
RCL 01 ; reselect originalprimary device
SELECT ; from HP-IL
RDN
FC?C 25 ; branches if device did not send accessory ID
GTO 05
X<Y? ; appends a space if accessory ID < 100
"\- " ; appends text in HP41UC https://www.hpmuseum.org/software/41uc.htm
ARCL X
ACA ; adds ALPHA register string to print buffer
;
; determine device class
;
16
/
INT
16
*
XEQ IND X ; place device class string into ALPHA
;
LBL 05
ACA
PRBUF ; print printer buffer
ISG 00 ; increment loop counter
GTO 01 ; branches for additional devices
RTN
;
; device class alpha strings
;
LBL 00
" CNTRLLR"
RTN
;
LBL 16
" MASS ST"
RTN
;
LBL 32
" PRINTER"
RTN
;
LBL 48
" DISPLAY"
RTN
;
LBL 64
" INTRFCE"
RTN
;
LBL 80
" INSTRMT"
RTN
;
LBL 96
" GRAPHIC"
END
Users browsing this forum: No registered users and 1 guest