floppy_stuttgart wrote:Hello,
I need a bit of support for transfering the function "Pascal(D)" which calculate the ellipse perimeter by entering
a
ENTER
b
ENTER
XEQ "PERIMEL"
.. 85 lines
(no approximation, no long series, except the calculator precision; just pi and X² and + and - and / and SQRTs and..).
If anybody would have 1h of his time (the week-end please), we could go through the whole process of converting text file into emu41 (running in "wine" window emulator under linux), then transfering into the HP41 and test-use.
wine hp41uc.exe /t=PERIMEL /r /k
txt[ Z:\home\xxxxxx\Downloads\PERIMEL.TXT ] => raw[ Z:\home\xxxxxx\Downloads\PERIMEL.raw ]
Error: unrecognized or incomplete function[ LBLΓÇ¥PERIMELΓÇ¥ ]
If [ LBLΓÇ¥PERIMELΓÇ¥ ] is an external module function, try: [ XROM mm,ff ]
Compiler error on line 1.
0 bytes written.
floppy_stuttgart wrote:.. 85 lines
HP41 user code programs don't consist of clauses, basically they are nothing but recorded key strokes. The only global commands are END and alpha labels except for single letter A..J and a..e. They may all be used at will, therefore -- what do you expect as result of such a "global syntax check"?floppy_stuttgart wrote:I wanted to make a global syntax check via a pre-processor
Any virtual HP41 running on PC or under DOSBox on PC (or under some other VM on PC) will do as Ideal programming editor. All bad is sorted out, what you can't type is not possible on HP41.floppy_stuttgart wrote:Is there any HP41 programming editor (in Geany, Eclipse, ..) for checking the HP41 programming syntax on PC?
floppy_stuttgart wrote:Is existing any virtual HP41 where the programs are edited and where we can see all program lines? or at least 20 of them.
wine HP82240Bv112Setup.exe
xxxxxx@ProDesk:~/Downloads$ 003a:err:module:import_dll Library MFC42u.DLL (which is needed by L"C:\\Program Files (x86)\\HP-Emulators\\HP82240B\\HP82240B.exe") not found
003a:err:module:attach_dlls Importing dlls for L"C:\\Program Files (x86)\\HP-Emulators\\HP82240B\\HP82240B.exe" failed, status c0000135
apt-get install winetricks
winetricks mfc42
with a light hand I assumefloppy_stuttgart wrote:Status:
- After starting the HP41 simulator "V41"
where in the V41 help file did you find a chapter "HowTo"? Or a statement about IR? Did you read the oo82162A manual I mentioned earlier? That is just the manual, if you surely do need it the program is here. Christoph offers a simpler IL2IR bridge named ILBlinky in here. Coould be enough in case you don't want print graphic and/or bar code.- Uploading the Infrared_Printer-Module into V41 (could be seen HowTo in the help file of V41)
You achieved to install and run V41? The process for the printer is similar.- still searching in HP82240B windows file where is the icon file (.png?) for starting the printer emulator from my desktop.
- still trying how/where to print into the printer simulator. SEND seems to be the command.
oo82162A.news.txt is in the ZIP bundle, the link will do when you unzipped it.floppy_stuttgart wrote:few issues with the proposal:
- link http://www.hp41.org/html/oo82162A.news.txt dont work
- I could not find the ZIP; now I have it. Thanks.
Your screen shot looks promising. Seems you installed the whole flock of devices Christoph offers for Virtual HP-IL. Now you have to decide which of them you want to connect and in which sequence. You have to set the port numbers of the devices and V41 accordingly as described in any of the HTM files that come with the devices. For example, the two devices in the middle of your screen shot, ILPilsim and ILBlinky, doulbe the same port numbers. Which of them is meant when the controller forwards frames to port 60001?ToDo for me; further support requested from here:
- connect V41 with video and printer emulation...
floppy_stuttgart wrote:could you please inform if your program is starting in a terminal like this:
"c:/pathToTheEXE/rexx.exe oo82162A.rxh"
I am battling in using my linux & wine environment.
jeffcalc wrote:floppy_stuttgart wrote:Hello,
I need a bit of support for transfering the function "Pascal(D)" which calculate the ellipse perimeter by entering
a
ENTER
b
ENTER
XEQ "PERIMEL"
.. 85 lines
(no approximation, no long series, except the calculator precision; just pi and X² and + and - and / and SQRTs and..).
Quite interesting !
To set the above mentioned virtual HP-IL mode parameters call the "TCP/IP Setup..." item in the ILVideo system menu (you get it by Alt+Space Bar or a left mouse click on the symbol in the top left corner or a right mouse click on the title bar). After you finished the setup, press the "Start" button please. If the "Start" button is disabled, the virtual HP-IL interface is already running. So you have to "Stop" and restart the interface for activating the new settings.
mike-stgt wrote:One more word: to care for HP41 and even older calculators is pretty nostalgic, similar with ooREXX and Windows. In contrast you use Linux&Wine, ask for webinars, tutorials and other modern rubbish and like to get ready for use "elles vorgekaut in d'Fingr g'schissa" (babelfish.de fails to translate that). I recommend to read along the descriptions and manuals and get it done as exactly as it is written. There are reasons why other options are not mentioned.
jeffcalc wrote:jeffcalc wrote:I'm still curious to see your code to compute the ellipse perimeter with "no approximation, no long series".
J-F
While Jean-François is curious to see your code I'd prefer to see the formula (now, not in weeks or months) unless it is the MAGM mentioned here and used there.floppy_stuttgart wrote:Still working on this. Will take several weeks.. or months [...] I am still building the calculating which is representing a non trivial formula.
floppy_stuttgart wrote:- a raw or txt file cannot be uploaded here
Users browsing this forum: No registered users and 1 guest